How to resolve Brother Printer error code 50?

0 Comments

For the best printing service at a minimal amount, brother printers are the only option that one must choose. Everything about the printer is excellent and is a renowned printing machine used by the people across the world. But it happens that the users get tired from the uncertain and unexpected situations when the Brother Printer error code 50 gets display on the screen. Thus, if the users are not getting the right way to overcome the brother printer problem, then they don’t have to worry.

Here, we are going to explain the printer troubleshooting steps to fix the printer problem. So, instead of wasting much time read the article carefully for an instant solution. Apart from this, users can get in touch with the printer service team for immediate assistance. But, instead of searching for expert assistance, apply the steps penned below.

Brother Printer error code 50
Brother Printer error code 50

Reason behind Brother Printer Error Code 50

Before proceeding further for the steps to resolve the brother printer error, first of all, get aware of the root cause behind the issue. Below we’ve discussed the possible reason behind the brother printer error 50.

Treating printer in the wrong manner or any piece of paper gets stuck in the machine causes such brother printer error.

If any mechanical malfunctioning starts occurring in the system, then such printer problem takes place.

So, because of the above-listed reasons, the brother printer error 50 takes place. Thus, after getting aware of the root cause, thoroughly read the printer troubleshooting steps mentioned below to resolve the printer problem.

Methods to Fix Brother Printer error code 50

Users who are looking for the printer troubleshooting steps to solve the printer error 50, they all are recommended to take a look at the steps penned below.

resolve Brother Printer error code 50
resolve Brother Printer error code 50

Method 1

  • Initially, open the cover of the scanner through the help of the plastic tabs located in the right and left side of the printer.
  • After this, move the printhead in the central location.
  • Then ensure that a piece of paper or staple is not stuck inside the printer.
  • Then reboot the printer if the printer error remains the same.

Method 2

  • Make use of the plastic clips of the cover to open the cover of the scanner. The clips are placed in the left and the right side of the printer and make sure that it gets open up properly.
  • Then, move the print head towards the right direction below the cover to ensure that the encoder strip is complete and cleaned.
  • Ensure to use a lint-free cloth to hold the encoder strip from both right and left side.
  • Then take a cloth and rub the strip from the left and then right side. Repeat the same process at least three times.
  • After cleaning it, reboot the printer and in case if the printer problem persists the same then proceed further with the next method.

Method 3

  • Ensure that the position of the encoder strip is correct as this strip gives the print head.
  • Then, carefully open the printer and reinsert the strip in the correct position.
  • After reinserting the strip, turn ON the printer again and then check if the brother printer error 50 gets resolved or not.

Hence, if after applying the printer troubleshooting steps the brother printer error code 50 does not gets fix or remains the same, then take printer help from the printer service professionals. Therefore, to get in touch with the experts, feel free to dial the toll-free helpline number. As the printer service experts are always there to assist all users. Read our blog about brother printer offline fix


Leave a Reply

Your email address will not be published. Required fields are marked *